Alpine
Alpine MRX-T15 Amplifier

Alpine MRX-T15 Amplifier

£139.99

Now up to 29% smaller than previous Alpine amplifiers, the new MRX range of amplifiers won't take over your boot space.

Thanks to the speaker level inputs these amplifiers can be used to upgrade factory fit head units that do not have preamp outputs.

The remote sensing function turns the power on automatically when the amp detects an incoming audio signal. There is no more need for an extra remote line.

The thermal protection circuit decreases power in two steps if the interior heat become too high, this prevents music being interrupted.

Alpine MRX-T15 Amplifier

Installation

  • Terminal Layout: Two-Sided
  • Screw Mount / Wire Cover: Integrated Wire and Mounting Screw Terminals

General

  • Amplifier Type: Class-D (Digital)
  • Channel Design: 2 Channel
  • Thermal Control: Thermal Management Control
  • Power Supply: MOSFET
  • Power Supply Design: DC-DC PWM Power Supply
  • Board Circuitry: S.T.A.R. Circuitry
  • Current Protection: Over-Current, Over-Voltage and Thermal Protection
  • Power Indicator: Top Mounted Blue LED Power Indicator
  • 2-Channel Speaker Level Input
  • Crossover: Variable Lowpass & Highpass Filter
  • Built-in Bass EQ
  • Final Outputs: Direct FET
  • Board Design: 6-layer Glass Epoxy PC Board
  • Continuously Adjustable Gain Control

Max Power Output Ratings

  • Total Max Power: 350W
  • RMS Power Ratings
  • Per Channel into 4ohms, 14.4V (≤1%THD+N): 2 x 50W
  • Per Channel into 2ohms, 14.4V (≤1%THD+N): 2 x 75W
  • Bridged into 4ohms, 14.4V (≤1%THD+N): 1 x 150W

Sound Tuning

  • Crossover Frequency (LPF/HPF Selectable): Variable, 50 - 400Hz (-12dB/oct.)
  • EQ (Equalizer): Bass EQ (fc=50Hz) 0 to +12dB

Dimensions

  • Heat Sink: 190 x 58 x 230 mm
  • Footprint: 250 x 58 x 230 mm

General

  • Power Requirements: 14.4V DC (11 - 16V)
  • Input Sensitivity (RCA Input): 0.2 - 4.0V
  • Input Sensitivity (Speaker Level Input): 0.5 - 10V
  • Input Impedance:10k ohms
  • Frequency Response (+0, -3dB: 1W into 4 ohms): 5Hz - 45kHz
  • Frequency Response (+0, -1dB: 1W into 4 ohms): 7Hz - 30kHz
  • THD+N (10W into 4 ohms):0.02%
  • THD+N (Rated Power into 4 ohms): <0.07%
  • Damping Factor: >500
  • Signal to Noise (Rated Power into 4 ohms): 104dB
  • Weight: 2.3kg