Alpine MRX-V60 5 Channel Amplifier

With Alpine PDX technology used on the new range of MRX amplifiers, Alpine have been able to still retain the high efficiency performance and audio quality but with a 29% reduction in footprint.

The remote sensing function turns the power on automatically when the amp detects an incoming audio signal. There is no more need for an extra remote line.

A factory fit head unit, even without preamp outputs can be easily upgraded as these amplifiers are able to be directly connected to factory fit equipment.

With the addition of the RUX-KNOB remote control bass knob, the MRX-V60 can be controlled from the dashboard.

Alpine MRX-V60 5 Channel Amplifier

Installation

• Terminal Layout: Two-Sided
• Screw Mount / Wire Cover: Integrated Wire and Mounting Screw Terminals

General

• Amplifier Type: Class-D (Digital)
• Channel Design: 4 Channel + Subwoofer
• Thermal Control: Thermal Management Control
• Power Supply: MOSFET
• Power Supply Design: DC-DC PWM Power Supply
• Board Circuitry: S.T.A.R. Circuitry
• Current Protection: Over-Current, Over-Voltage and Thermal Protection
• Power Indicator: Top Mounted Blue LED Power Indicator
• 4-Channel Speaker Level Input
• Crossover: Variable Lowpass & Highpass Filter
• Built-in Bass EQ
• Built-in Subsonic Filter
• Final Outputs: Direct FET
• Board Design: 6-layer Glass Epoxy PC Board
• Continuously Adjustable Gain Control
• Remote Bass Control ( RUX-KNOB sold separately )

Max Power Output Ratings

• Max Power: 1200W
• RMS Power Ratings
• Per Channel into 4ohms, 14.4V (≤1%THD+N): 4 x 50W + 200W
• Per Channel into 2ohms, 14.4V (≤1%THD+N): 4 x 75W + 300W
• Bridged into 4ohms, 14.4V (≤1%THD+N): 2 x 150W

Sound Tuning

• Crossover Frequency (LPF): 50 - 400Hz (-12dB/oct.) for Subwoofer
• Crossover Frequency (HPF): 50 - 400Hz (-12dB/oct.) for CH-1/2/3/4
• EQ (Equalizer): Bass EQ (fc=50Hz) 0 to +12dB
• Subsonic: OFF / 5 - 30Hz (-24dB/oct.)

Dimensions

• Heat Sink: 210 x 58 x 230 mm
• Footprint: 270 x 58 x 230 mm

General

Power Requirements: 14.4V DC (11 - 16V)
• Input Sensitivity (RCA Input): 0.2 - 4.0V
• Input Sensitivity (Speaker Level Input): 0.5 - 10V
• Input Impedance:10k ohms
• Frequency Response (+0, -3dB: 1W into 4 ohms) for CH-1/2/3/4: 5Hz - 45kHz
• Frequency Response (+0, -3dB: 1W into 4 ohms) for Subwoofer: 5 - 400Hz
• Frequency Response (+0, -1dB: 1W into 4 ohms) for CH-1/2/3/4: 7Hz - 30kHz
• Frequency Response (+0, -1dB: 1W into 4 ohms) for Subwoofer: 10Hz - 300Hz
• THD+N (10W into 4 ohms) for CH-1/2/3/4: 0.02%
• THD+N (10W into 4 ohms) for Subwoofer: 0.008%
• THD+N (Rated Power into 4 ohms) for CH-1/2/3/4: 0.07%
• THD+N (Rated Power into 4 ohms) for Subwoofer: 0.04%
• Damping Factor for CH-1/2/3/4:500
• Damping Factor for Subwoofer:1000
• Signal to Noise (Rated Power into 4 ohms) for CH-1/2/3/4: 103dB
• Signal to Noise (Rated Power into 4 ohms) for Subwoofer: 107dB
• Remote Level: 0 to -20dB ( RUX-KNOB Required )
• Weight: 2.8kg